If keypad is connected to a telephone socket, the system will then alert you via telephone when the alarm is triggered. Without this, the alarm would still function as a standard alarm without notifications.

You will be able to activate or deactivate your alarm with your mobile phone by dialling the phone number associated with the control panel and entering your programmed pin code. Further details can be found on page 23 of the Yale Intruder Alarm User Guide.

The 200 metre extended range secures all of your home in a circular radius not just where the hub is facing.

Installation is only available on the UK Mainland.

Typically, most customers will have one PIR to cover the landing area of the upstairs and one PIR per room downstairs.

Unfortunately the system would not work reliably with a steel-framed area due to reflection of the a radio signals.

The siren on this kit will flash with a comfort light.

The control panel is powered by mains. There is also an internal battery to provide back up power in case of power failure.

The Alarm can be disarmed via both the Keypad and Key Fob.

Range extenders are not available as an accessory for the alarm kits, however the alarm components have up to 200 meters wireless connectivity range to the central hub.

You can have up to 30 components connected to this system, including additional PIR's.

Unfortunately we do not sell additional external Sirens, however I believe these can be purchased from Yale direct.

The external siren can be set from 1 to 10 minutes in 1 minute increments.

Entry and exit time gives you a delay to allow you time to enter or exit your premises and arm/disarm the system. Times can be set from 00 seconds (no delay) up to 70
seconds in 10 second increments.
20 seconds is the factory default.

The Hub has a short notification bleep when activated/deactivated, however this can be silenced via the options menu.

There are no Pet Friendly sensors that have threshold of larger than 25kg. Anything larger than this size would trigger both standard and Pet Friendly PIR motion sensors. You may prefer to use a Yale Intruder Door Contact on your doors and windows.

The entry delay will work on both the PIR's and the door contacts.

This feature can be found in the (Tel-Settings) in the options menu on the hub.

An additional siren can be added at anytime.

This particular system does not require internet access, the system is connected to the mains and your landline phone socket and will contact each component via secure radio waves.