The fob will be synced to your alarm hub. This system employs rolling code technology that changes the signal code so that it cannot be jammed, duplicated or cause interference with other systems.

There must always be an entry/exit delay. This feature can not be disabled. However, the delay can be customised in 10 second increments, meaning that the delay could be shortened to 10 seconds if required.

The easy fit key fob is only designed to work in the vicinity of your home with no more than a 10 metre radius from the central alarm hub.

This keyfob would be incompatible. For the Yale Sync IA Range you would need the Yale Sync Remote Keyfob.

You can add up to 20 devices to your Yale Smart Home Alarm, including additional Keyfobs.

The dimensions of the Easy Fit Keyfob are H63 x W35 x D10mm.

It is very easy to arm and disarm the alarm by pressing the lock and unlock buttons on the keyfob.

The Yale Easy Fit Keyfob and the Yale Easy Fit Keypad can be used together in the same system to activate or deactivate the alarm.

The alarm system will allow you set 2 zones (eg. upstairs and downstairs) if you have pre-set these zones then the keyfob can be used to arm / dis-arm as needed.