The PIR's don't have a constant flashing light. The only time the sensor will light up is when it picks up any motion in the room.

The siren box on the full range of Yale Easy Fit Alarms is wireless and uses battery power only.

This package does not include the Easy Fit Pet PIR sensors as standard but you can order these as an optional extra in the accessories menu.

The alarm has a secure rolling code transmission signal and enhanced anti-jamming detection which would trigger the alarm if tampering in this way was attempted. This unique code is used by the system to determine that the correct remote control is attempting to contact the alarm.

To be EN50131 compliant the alarm must be professionally installed and include an annual maintenance check.

The PIR's could be fitted higher but you would need to adjust the angle to ensure that motion is detected and enable the best coverage of the room in which it is fitted.

It is recommended that you do not point the PIR directly at a door which includes a door contact sensor. It is not necessary to have both as just one of the sensors will trigger the alarm when somebody enters the room. There is also a chance of technical issues as the signal can get delayed.

Yes the adjustment period of the siren can be changed to either 10 minutes or 3 minutes.

Only you can link multiple keyfobs to the alarm and only these inked fobs will arm or disarm the alarm system.

The door sensors cannot be configured in anyway if the alarm is disarmed, the door sensor will only work when you set the alarm and notify you when its triggered.

Yes, you can connect the Yale Easy Fit Standard Alarm and the Yale Easy Fit Telecommunicating Alarm to create a single system.

No, the standard PIR will trigger the alarm if there was any type of movement in the house. You would require the Yale Easy Fit Pet PIR Motion Detector which is ideal for small household pets.

Once the alarm is triggered the siren will sound for 10 minutes.

The alarm system could be set and active in this manner and would only trigger should a door or window be opened and the magnetic contact broken.

Key fobs can be linked to this system and they are available to add to your basket when ordering the Alarm.

The limit on our pet friendly sensors is 25kg so unfortunately this would not be suitable for yourself. However you might want to alarm the room by fitting a Yale Easy Fit Door Contact to the door or window. You would then be alarmed if you encountered any intruders trying to enter.

Unfortunately this alarm only comes with one siren box. It is not possible to purchase additional sirens or a dummy siren for this model. You may prefer to look at the Yale Easy Fit Telecommunicating Alarm which comes supplied with one siren and one dummy siren.

This alarm includes two Yale Easy Fit Door Contacts. These are suitable to attach to most windows and doors.

The PIR's supplied with the system as standard are not Pet Friendly. You can add Yale Easy Fit Pet PIR Motion Detector's as an optional extra from the listed accessories.

There is no specific requirement for the broadband speed. You will receive alarms notifications regardless of the internet speed.

The Yale Easy Fit Alarms Series includes a 100 decibel siren box which is comparable with wired home alarms.

Battery power will be used only when the alarm is triggered, which should be very rare. Therefore, a good brand of batteries should last approximately 5 years as this is the average shelf life of a battery.

Unfortunately all the components excluding the Siren are only suitable for internal use.

Unfortunately Yale do not make this accessory. However I can recommend the ERA Vibration Sensor. This would be suitable for any ERA alarm system.

Once one of the sensors has been triggered you will have the set entry/exit time period to de-activate the alarm. Once this time has expired if a senor detects further activity the siren will trigger.

This system is not compatible with mobile phones and will alert via landline numbers only. We do offer Yale Smart Home Alarms that can be used with your smartphone and have multiple mobiles linked to the system.

The internal siren function cannot be added to this alarm. I would recommend the Yale Smart Home Alarm Kit - SR-320 which includes both as standard.

The wireless components run on a unique frequency and employ rolling code technology to stop interference from or with other systems.

No, this alarm system is not compatible with the PIR camera. I would recommend having a look at our Yale Smart Home Alarm Kit - SR-320 as an alternative option.

The alarm components have a 30 meter wide wireless range.

The Yale Door contact is designed to be used with most doors/windows. However the surface must be flat as possible so both the contact parts can connect. This is not always achievable with a garage door. It may be worth adding a Yale Easy Fit PIR Motion Detector to detect the door opening rather than a door contact.

The sensors have not been tested in this position so their performance accuracy is unknown and it is not recommended.

Yes the keypad will beep when the alarm system is activated or de-activated.

Any motion in the house will trigger the PIR. You would require the Yale Easy Fit Pet PIR Motion Detector as these are suitable for small pets.

The alarm would not auto re-set. Once the alarm has been triggered, the siren will sound for up to 10 minutes. The alarm will remain in a triggered state and will sound immediately if one of the sensors is triggered before it is manually re-set.

Yes, dependant of course where the PIR is positioned, any movement at all would trigger the alarm.

A loss of power would not trigger the alarm. In the event of a power cut the back up battery would automatically power the alarm.

The components for both systems are the same. The Smart Home Alarm series is the most recent series released, all of which can be used in conjunction with your smartphone. This is not the case with the Easy Fit Alarms where only the Yale Easy Fit SmartPhone Alarm has this capability.

The alarm can be set from anywhere in the house by using the portable keypad. You may be interested to look at the Yale Easy Fit Telecommunicating Alarm, which has the facility to set zones.

The alarm is battery operated and the components are pre-linked. They have a 30 metre wireless range using the 868MHz frequency, meaning no wiring or running cables are required to connect the components.

Yes I would always advise on installing the alarm in a secure location. It may also be worth noting that all our easy fit alarm systems come installed with an anti-tamper device. Any disturbance to the touch screen panel will trigger the siren automatically.

Any motion would trigger the PIR sensors including pets. I recommend a Yale Easy Fit Pet PIR Motion Detector. These are suitable for small pets under 20kg.

The siren box is powered by AA batteries and they are included in the box.

Having your windows slightly open (night Vent) should not trigger the alarm as long as nothing comes in to contact with the sensor.

The PIR Sensors require 3x AAA alkaline batteries and the external Siren requires 4x D alkaline batteries.

The motion detection range of this component is 12 meters.

The Yale Easy Fit Door Contact is supplied with fixing screws for fixing to wood and double sided sticky foam pads for use on UPVC doors. Therefore, drilling is not always required.

The door sensor can be installed any way up, so long as the contacts are touching each other. The alarm is triggered once the contact is broke, when the door is opened.

The Yale Easy Fit Keyfob will allow you to activate or deactivate the alarm system even if it has been set by the Yale Easy Fit Keypad.

The siren can be easily installed with a power drill and screwdriver with the fixings provided. A pebble dash wall would prevent a flush fit but wouldn't cause a problem with the installation.

The Yale Easy Fit Keyfob can be used to arm or disarm the alarm, once activated, with a simple button press. If the keyfob is lost or stolen, you can delete the device from the system at any time.

The siren box on the Yale Easy Fit Alarms Series has a blue light which flashes when the alarm is triggered. There is also a comfort LED which will stay on all the time. This light can be turned off at any time on the control panel.

The Yale Easy Fit Smoke Detector is available and is compatible with any of the Yale Easy Fit Alarms Series. This smoke detector can be purchased as a singular item or as an accessory at a lower price, when purchased together with the alarm system.

Yes once the alert period has expired the system re-arms so if one of the sensors is triggered the alarm will activate again.

Yes, it is possible to include more than one Yale Easy Fit Keypad with your Yale alarm system.

Yes they are compatible and both would work together.

Any of the alarm systems will still operate as an alarm without an Internet connection, however for the Smart Alarm notifications, an internet connection will be required.

Unfortunately the entry/exit time is fixed at 20 seconds.

The alarm is fitted with an anti-tamper device which sets off the siren when disturbed. However, you may prefer the Yale Easy Fit Apartment Alarm which includes an indoor siren box.

Both door sensors would activate the alarm if the contact on the door in question was broken. An additional keypad would allow you to arm or disarm the alarm at either location of the keypad.

Dummy siren boxes are not available to purchase as an accessory for this alarm. You may consider one of our ERA Burglar Alarms which has a dummy siren available to purchase.

Unfortunately this alarm only has one zone. I would recommend the Yale Easy Fit Telecommunicating Alarm which allows you to create 2 zones which you can set via the control panel.